EV Charger Installation in Park City, UT

Our electricians start with a load calculation on your panel, then choose the circuit size and charger location that give you the fastest charge your service can support. We install home EV charging stations in garages, carports and driveways across Summit County.

Call (888) 633-7804Same-day service, 24/7 emergency response

EV charger installation in Park City, UT: what we handle

Charging at home is the best part of owning an electric vehicle, as long as the circuit behind the charger is sized and installed correctly. KITMUND provides EV charger installation in Park City for every make, from a 240 volt outlet in the garage to a hardwired Tesla Wall Connector.

Level 2 charger installation

A 240 volt charging station that adds many times the range per hour of a standard wall outlet.

Tesla Wall Connector installation

Hardwired on a dedicated circuit sized for the charge rate you want.

Home EV charging stations

ChargePoint, Wallbox, Emporia, JuiceBox, Ford, Rivian and other EVSE units.

240 volt EV outlets

A NEMA 14-50 or 6-50 receptacle on a dedicated circuit for plug-in chargers.

Load calculations and load management

We check whether your panel has room, and offer load-sharing devices when it is tight.

Outdoor and detached garage installs

Weatherproof equipment, trenching and conduit where the charger is away from the panel.

Signs you need EV charger installation in Park City

The portable cord that came with the car cannot keep up with your driving
You are taking delivery of a new EV or plug-in hybrid
A second EV is joining the household
You want a tidy hardwired charger instead of a cord through the garage
Your panel is full and you are not sure it can take a charger

Why it matters in Park City

Mountain homes around Park City carry loads that valley homes do not: snowmelt systems, heat tape, hot tubs, garage heaters and well pumps. That makes correct sizing especially important in Summit County, and it is why we calculate winter demand before recommending a panel, circuit or wire size.

When you need EV charger installation in Park City, KITMUND offers fast service across Summit County. Call (888) 633-7804 today.

How our EV charger installation service works in Park City

Call (888) 633-7804
Tell us what is happening or what you want installed. We ask a few questions and book a time, or send someone straight away if it is urgent.
We look and explain
The electrician inspects, tests and tells you in plain words what is needed and what it will cost before work starts.
We do the work
Neat, code-correct work with floors and furniture protected. Permits and inspections are arranged where the local jurisdiction requires them.
We test and walk you through it
Everything is tested and labeled, the work area is cleaned, and we show you what was done.

EV charger installation near me: Park City and nearby towns

Our electricians work in every part of Park City, including Old Town, Deer Valley, Prospector, Park Meadows, Thaynes Canyon, Pinebrook, Jeremy Ranch, Kimball Junction, Silver Springs and Snyderville. Whether you searched for EV charger installation near Thaynes Canyon or an electrician in Pinebrook, you reach the same crew at the same number. Nearby communities we travel to from Park City include Peoa (about 12 mi), Oakley (about 12 mi), Midway (about 13 mi), Kamas (about 14 mi), Heber City (about 15 mi) and Coalville (about 17 mi).

EV charger installation questions in Park City

How much power does a Level 2 charger need?

Most home chargers run on a 240 volt circuit between 30 and 60 amps. A Tesla Wall Connector delivers its top rate on a 60 amp circuit. We size the circuit to your vehicle and your panel.

Will I need a panel upgrade for an EV charger in Park City?

Not always. Many Park City homes have enough capacity, and load management devices can help when the panel is close to its limit. If an upgrade is needed we will explain why and quote both together.

Do you install chargers for brands other than Tesla?

Yes. We install every major brand of EVSE and can add a 240 volt outlet for plug-in units.

How long does an EV charger installation take?

A straightforward garage install near the panel usually takes a few hours. Longer runs, trenching or panel work add time.

More electrician services in Park City, UT

People find this service by searching for EV charger installation Park City, Tesla charger installation Park City, Level 2 charger installation Park City, home EV charging station Park City, electric car charger installation Park City, EVSE installation Park City, Tesla Wall Connector installation Park City and EV charger installation near me.

Talk to an electrician now

EV charger installation in Park City, UT. Call (888) 633-7804 for fast service, 24/7.

Call (888) 633-7804