Call (888) 633-7804

EV Charger Installation in Utah

Our electricians start with a load calculation on your panel, then choose the circuit size and charger location that give you the fastest charge your service can support. We install home EV charging stations in garages, carports and driveways across Utah.

Call (888) 633-7804Same-day service, 24/7 emergency response

EV charger installation in Utah: what we handle

Charging at home is the best part of owning an electric vehicle, as long as the circuit behind the charger is sized and installed correctly. KITMUND provides EV charger installation in Utah for every make, from a 240 volt outlet in the garage to a hardwired Tesla Wall Connector.

Level 2 charger installation

A 240 volt charging station that adds many times the range per hour of a standard wall outlet.

Tesla Wall Connector installation

Hardwired on a dedicated circuit sized for the charge rate you want.

Home EV charging stations

ChargePoint, Wallbox, Emporia, JuiceBox, Ford, Rivian and other EVSE units.

240 volt EV outlets

A NEMA 14-50 or 6-50 receptacle on a dedicated circuit for plug-in chargers.

Load calculations and load management

We check whether your panel has room, and offer load-sharing devices when it is tight.

Outdoor and detached garage installs

Weatherproof equipment, trenching and conduit where the charger is away from the panel.

Signs you need EV charger installation in Utah

  • The portable cord that came with the car cannot keep up with your driving
  • You are taking delivery of a new EV or plug-in hybrid
  • A second EV is joining the household
  • You want a tidy hardwired charger instead of a cord through the garage
  • Your panel is full and you are not sure it can take a charger

Why it matters in Utah

Utah homes are adding load quickly: electric vehicles, heat pumps, finished basements, hot tubs and shops. Many houses across the state still have 100 amp services and full panels, so we start every installation with a load calculation.

Homeowners and businesses in Utah call (888) 633-7804 for EV charger installation they can count on.

How our EV charger installation service works in Utah

  1. Call (888) 633-7804

    Tell us what is happening or what you want installed. We ask a few questions and book a time, or send someone straight away if it is urgent.

  2. We look and explain

    The electrician inspects, tests and tells you in plain words what is needed and what it will cost before work starts.

  3. We do the work

    Neat, code-correct work with floors and furniture protected. Permits and inspections are arranged where the local jurisdiction requires them.

  4. We test and walk you through it

    Everything is tested and labeled, the work area is cleaned, and we show you what was done.

EV charger installation questions in Utah

How much power does a Level 2 charger need?

Most home chargers run on a 240 volt circuit between 30 and 60 amps. A Tesla Wall Connector delivers its top rate on a 60 amp circuit. We size the circuit to your vehicle and your panel.

Will I need a panel upgrade for an EV charger in Utah?

Not always. Many Utah homes have enough capacity, and load management devices can help when the panel is close to its limit. If an upgrade is needed we will explain why and quote both together.

Do you install chargers for brands other than Tesla?

Yes. We install every major brand of EVSE and can add a 240 volt outlet for plug-in units.

How long does an EV charger installation take?

A straightforward garage install near the panel usually takes a few hours. Longer runs, trenching or panel work add time.

Talk to an electrician now

EV charger installation in Utah. Call (888) 633-7804 for fast service, 24/7.

Call (888) 633-7804
Call (888) 633-7804, open 24/7